MOLYBDENUM ( I Squared R Element )

MoSi2 Heating Element

 (Type : MD-31 (1,700°C), MD-33 (1,800°C), MD-34 (1,850°C)


The Moly-D element can operate up to an element temperature of 3362ºF (1850ºC).


Moly-D elements have the ability to withstand oxidation at high temperatures by forming a protective layer of quartz on its surface.
If this glassy phase should be exposed to contaminants, a lower melting phase forms.
This material literally drips off the element exposing more molybdenum disilicide on which a new protective oxide layer forms.

Moly-D elements become somewhat ductile at approximately 1200ºC (2190ºF).


  • Heating Wire and Strip ( Ferritic + Austenitic Alloys ) High-quality of imported heating wire and strip from Germany,Sweden, France, and Japan.With our more than 25 years experie...

  • SiC Heating Elements.(Type : (RR, TW, RA, DB, SE, SER, ETCS) The Starbar heating element has a maximum use temperature of 3100ºF (1700ºC). RR/TW Starbars are described by givin...

  • Bundle Rod Heater is the heater which consists of heat resistant wire and round or square ceramics.The heater can be used both direct heat and inderect heat by put in the radiant t...

  • Tubular heater is a heater generating heat from the heater coil inside the tube (either stainless or Incoloy).With our more than 25 years experience engineer team, we can design, c...
Visitors: 6,391